CINCINNATI 500 H - CAPACITY 500 TON X 13.000 MM
CINCINNATI Cap. : 500 Ton x 13.000 mm (1437)
Brand : CINCINNATI - USA
Type : 500 H
Build : 1988
Technical dates :
Capacity 500 ton x 13.000 mm
Total weight 140 ton
Throat length 380 / 400 mm
Stroke 14 inches
Shut height / gap after lifting the ram in fully in up position 860 mm
Workable length 13.100 mm
Distance between columns 12.400 mm
Workable width / bed size 650 mm
Total connected power 50 HP
The machine was used in Aerospace industry, not for bulk production use.
This equipment is suitable to manufacture the lighting mast, Octagonal Street Light poles, Polygonal Wind Mill Tower, Polygonal Telecom Tower /Monopole Tower & “Z” Purling for Pre-Engineering buildings etc.
It was in working condition, now dismantled.
Ref. 31342
AMADA GPX 630 HYDR. SHEAR CAP.: 3.000 X 6 MM
AMADA Hydr. Shear Cap.: 3.000 x 6 mm
Brand : AMADA
Type : GPX 630
Build : 1995
Capacity 3.000 x 6 mm
Ref. 31343
AMADA GS 840 HYDR. SHEAR CAP. : 4.000 X 8 MM
AMADA Hydr. Shear Cap. : 4.000 x 8 mm
Brand : AMADA
Type : GS 840
Build : 1999
Capacity 4.000 x 8 mm
Power 15/20 HP
Stroke 190 mm
Ref. 31344
AMADA APX 8025 BRAKE PRESS CAP.: 80 TON X 2.500 MM (1406)
AMADA Brake Press Cap.: 80 Ton x 2.500 mm (1406)
Brand : AMADA
Type : APX 8025
Technical dates :
Capacity 800 KN
Max. bending length 2.505 mm
Motor power 7,5 kW
Open height 370 mm
Stroke length 100 mm
No. of cylinders 3
Throat depth 400 mm
Max. pressure 300 Bar
Oil capacity 70 l
No. of Axis 7
Axis configuration Y, X1 / X2, R1 / R2
Approach speed 73 mm/sec
Working speed 1 to 9,2 mm/sec
Return speed 1 to 85 mm/sec
Machine weight 4.400 kg
Machine length 3.080 mm
Machine width 2.070 mm
Max. beam length 2.500 mm
Distance between columns 2.050 mm
Ref. 31345
