9000 TONS OPEN DIE FORGING PRESS
OPEN DIE FORGING EQUIPMENT LIST
3000 TONS PRESS
SPECIFICATION
TYPE : 4 COLUMNS PUSH DOWN
PRESS DAY LIGHT : 3472
WORKING DAY LIGHT : 1800
TABLE : Ø 2000
COLUMU : 2170
CENTRE : 1250
WORKING VOLTAGE : 3300 V
MOTOR CAPACITY : 700 KW*4
6000 TONS PRESS
SPECIFICATION
TYPE : 4 COLUMNS PUSH DOWN
PRESS DAY LIGHT : 4200
WORKING DAY LIGHT : 1800
TABLE : Ø 2500
COLUMU : 2819
CENTRE : 1320
WORKING VOLTAGE : 6000 V
MOTOR CAPACITY : 470 KW*6
40 TONS MANIPULATOR
SPECIFICATION
1. CAPACITY LOAD MOMENT – 75 TON – METER MAX.
LIFTING WEIGHT : 40 TON MAX.
ROTATION POWER OF TONG – 8 TON METERS. MAX.
2. JAW OPENING – ROUND 1,850 mm max, 4000 mm MIN.
3. ROTATING DIAMETER OF FULLY OPENED TONG – 2,650 mm Max.
9000 TONS PRESS
SPECIFICATION
TYPE : 4 COLUMNS PUSH DOWN
PRESS DAY LIGHT : 6500
WORKING DAY LIGHT : 2500
TABLE : Ø 2800
COLUMU : 4580
CENTRE : 1800
WORKING VOLTAGE : 6600 V
MOTOR CAPACITY : 600 KW*5
120 TONS MANIPULATOR
SPECIFICATION
1. JAW OPENING – ROUND 3,000 mm max, 100 mm MIN.
2. CAPACITY LOAD MOMENT – 300 TON – METER MAX.
3. TONGS CENTER HEIGHT ABOVE RAILS – 3300mm Max.
4. SPEED – LIFTING AND LOWERING OF TONGS – 900m/MIN.
TITLING OF TONGS – 90m/MIN
SIDE SHIFTING OF TONG – 80m/MIN
CLAMPING OF TONG – 70m/MIN.
Ref. 31315
SMS HASENCLEVER SPK 1600 SCREW PRESS (HYDRAULIC)
Screw Press (Hydraulic) SMS Hasenclever SPK 1600 Yom: 1986
diameter of spindle: 355mm
nominal force: 16MN
max. force: 20MN
daylight from the left to the right: 1060mm
table area:
width from the left to the right: 1000mm
deep from the front to the back: 1 120mm
slide working area:
width from the left to the right: 1 000mm
depth from the front to the right: 1 120mm
slide stroke: 425mm
min. height daylight with the deepest position of slide: 930mm
max. height daylight in the heights position of the slide: 1 355mm
max. slide strokes:
full stroke: 22/m
half stroke: 33/m
required pressure: 5 bars
weight of the machine: 72 000 kg
hydraulic weight: 4 150kg
Ref. 31319
HUTA ZYGMUNT MPM 3150B FORGING HAMMER (RAM STROKE: 800 MM)
HUTA ZYGMUNT FORGING HAMMER MPM 3150B
Mass of falling parts: 1000 kg
Ram stroke: 800 mm
Energy of full blow: 3600kgm
Quantity of stroke: 110
Mass of hammer: 35t
Year of production: 1974r.
Hammer is in excellence working condition.
Ref. 31320
AJAX 1000 TONS FORGE PRESS LINE
AJAX 1000 TONS FORGE PRESS LINE
Bed Size: 736.60mm x 914.40mm
Ram Size: 685.80mm x 685.80mm
Stroke: 254.00mm
Shut Height: 558.80mm / 539.75mm (Has Elevating Wedge)
Speed: Constant
EQUIPPED WITH:
American Induction Heaters
Shaker Input Conveyor
ABB Material Handling Robot
Whole unit is Floor Mounted...NO PIT REQUIRED
Year (New 1942)
Ref. 31321
