NATIONAL 700 TONS MAXI PRESS FORGE LINE
NATIONAL 700 TONS MAXI PRESS FORGE LINE
Bed Size: 609.60mm 914.40mm
Speed: Constant
EQUIPPED WITH:
American Induction Heaters
Shaker Input Conveyor
Bliss S1-125-24-30 Trim Press
Whole unit is Floor Mounted...NO PIT REQUIRED
Year (New 1951)
Ref. 31322
CRANK PRESS MKN- R-160/7, 2-300 2-60, / BAR SHEARS LBS 200, MSR 32 / VERSON 1250 TON TRANSFER PRESS
Crank Press, Bar Shears & TRANSFER PRESS
A)
Crank Press MKN-2-600
Made by: Koyo – KOMATSU MAYPRES Ltd. Japan, Press capacity: 600 ToF, Slide stroke: 148 mm, Transfer stroke: 200 mm, Clamping Stroke: 25 mm, Clamping force: 15 daN, Max. blank weight: 750 gr, Blank dimensions: diameter 8-50 mm, length 8-50 mm, Die height: 420 mm, Slide adjustment: 50 mm, Bolster: 630*900 mm, Slide: 540*600 mm, Stroke/min: 40, Main motor power: 37 Kw, Weight: 24 To
B)
Crank Press MKN-2-300
Made by: Koyo – KOMATSU MAYPRES Ltd. Japan, Press capacity: 300 ToF, Slide stroke: 140 mm, Die height: 400 mm, Slide adjustment: 40 mm, Bolster: 450*700 mm, Slide: 470*480 mm, Stroke/min: 50, Main motor power: 37 Kw, Weight: 18 To
C)
Crank Press MKN-R-160/7
Made by: Koyo – KOMATSU MAYPRES Ltd. Japan, Press capacity: 160 ToF, Slide stroke: 70 mm, Transfer stroke: 200 mm, Clamping stroke: 25 mm, Clamping force: 15 daN, Max. blank weight: 750 gr, Blank dimensions: diameter 8-50 mm, length 8-50 mm, Die height: 340 mm, Slide adjustment: 30 mm, Bolster: 430*600 mm, Slide: 400*360 mm, Stroke/min: 50, Main motor power: 11 Kw, Weight: 13.5 To
D)
Bar Shears LBS 200
Made by: KOMATSU MAYPRES Ltd. Japan, Press capacity: 200 ToF, Ram stroke length: 75 mm, Number of stroke (idle running): 50 rpm, Shut height: 442 mm, Bolster (depth x width): 460 mm x 700 mm, Ram (depth x width): 300 mm x 410 mm, Maximum length shearable: 400 mm, Minimum length shearable: 27.1 mm, Max. Diam. Bar: 52 mm, Main motor power: 30 Kw, Weight: 10 To
E)
Bar Shears MSR 32
Made by: KOMATSU MAYPRES Ltd. Japan, Press capacity: 32 ToF, Slide stroke: 44.1 mm, Cutter slide stroke: 36.7 mm, Max. Diam. Bar: 36 mm, Min. Diam. Bar: 5 mm, Maximum length shearable: 100 mm, Minimum length shearable: 5 mm, Main motor power: 7.5 Kw, Weight: 4.5To
F)
VERSON 1250 TON TRANSFER PRESS T-ES1-1250-66-48T
Made by: VERSON USA, Press capacity: 1250 ToF, Forming sections: 3, Table size: 1676 x 1220 mm, Stroke of press: 356 mm, Adjustment: 152 mm, Capacity of lift out: 50 To, Capacity of cushion: 175 To, Stroke of cushion: 13 mm, Stroke of lift out: 101.6 mm, Speed: 30-50 strokes/min, Weight: 192 To
Ref. 31323
DDS 20 TONS / 40 MT RAIL BOUND FORGING MANIPULATOR
20 TON / 40 MT Used DDS Rail Bound Forging Manipulator
Manufacturer: DDS
Nominal carrying capacity: 20 metric tons
Tongs clamping moment: 40 meter tons
Tongs opening w/o inserts: 430-1,180 mm rounds
Tongs ctr height above rails: 1,200 - 1,950 mm
Vertical stroke of tongs: 750 mm
Vertical tilting angle of tongs: ± 6°
Horizontal side shift of tongs: 200 mm
Distance between the rails: 3500 mm
Net weight(approx): 200 tons
Ref. 31329
GLAMA 10 TONS MOBILE CHARGER
10 TON Used GLAMA Mobile Charger
Manufacturer: GLAMA
Max rated capacity: 100 kn
Max torque at tongs: 300 kNm
Max jaw opening: 960 mm
Position of tongs above floor: 1,000/3,350 mm
Motor HP / KW: Hp/KW
Weight: 26,295 kg
Ref. 31330
